Encountering the “Please Assign Buttons to Actions” error in Hunt: Showdown can be frustrating, especially when you are ready to jump into a high-stakes bounty hunt. This issue typically appears when the game detects missing or conflicting key bindings, preventing you from proceeding. Fortunately, the problem is usually tied to configuration errors, input device conflicts, or corrupted settings files—and it can be fixed with a structured approach.
TL;DR: The “Please Assign Buttons to Actions” error in Hunt: Showdown occurs when essential actions are unbound or improperly configured. To fix it, reset key bindings to default, manually reassign missing controls, check for controller and keyboard conflicts, and verify game files. In some cases, deleting the user settings folder resolves corrupted input profiles. Keep your input settings clean and consistent to avoid the error recurring.
Why This Error Appears
Hunt: Showdown requires all critical gameplay actions to have assigned inputs before matchmaking or entering gameplay. If even one mandatory action—such as firing, aiming, interacting, or melee—is unassigned, the game blocks you from proceeding.
Common causes include:
- Reset or corrupted key bindings
- Switching between controller and keyboard
- Profile syncing glitches
- Game updates overriding input configurations
- Conflicts caused by third-party software
Understanding the root cause makes troubleshooting significantly easier.
Step 1: Reset Key Bindings to Default
The fastest and most reliable fix is performing a full reset of your control scheme.
How to reset controls:
- Launch Hunt: Showdown.
- Go to Settings.
- Open the Controls tab.
- Select Reset to Default.
- Apply changes and restart the game.
This action restores all mandatory bindings and often resolves hidden inconsistencies.
If the error disappears after resetting, you can carefully re-customize your layout afterward.
Step 2: Manually Reassign Missing Actions
If resetting does not fix the issue, you likely have one or more unbound mandatory actions.
Focus specifically on these critical controls:
- Primary Fire
- Aim Down Sights
- Interact
- Melee Attack
- Jump
- Crouch
- Reload
- Switch Weapon
Scroll carefully through each control category. Hunt sometimes shows missing assignments in subtle ways, particularly after updates.
Important: Make sure no action shows “Unassigned.” Even one missing assignment can trigger the error.
Step 3: Disconnect Unused Controllers
Another frequent cause is input device conflict. If you have a controller plugged in while using a keyboard and mouse, Hunt may register duplicate or conflicting bindings.
To test this:
- Disconnect all external controllers.
- Disable Bluetooth controllers.
- Restart the game using only one input method.
If you are using a controller, make sure every required action also has controller bindings assigned.
Switching between input types without confirming bindings is one of the most common triggers for this issue.
Step 4: Delete the User Settings Folder
If the error persists, corrupted configuration files may be the problem. Removing them forces the game to rebuild fresh input profiles.
Steps:
- Close Hunt: Showdown completely.
- Navigate to:
C:\Users\[YourName]\Saved Games\Crytek\Hunt Showdown - Locate the user folder.
- Create a backup copy.
- Delete the original folder.
- Restart the game.
The game will regenerate default configuration files.
Note: You will lose custom settings, so be prepared to reconfigure graphics and controls.
Step 5: Verify Game Files
If configuration resets fail, you should verify the integrity of your game installation.
On Steam:
- Open Steam Library.
- Right-click Hunt: Showdown.
- Select Properties.
- Go to Installed Files.
- Click Verify integrity of game files.
This scan checks for corrupted or missing files that may interfere with control validation.
The process can take several minutes but is highly effective in resolving unexplained errors.
Advanced Troubleshooting
If standard fixes do not work, consider these deeper solutions:
1. Disable Overlay Software
Overlays from the following programs may interfere with input detection:
- Steam Overlay
- Discord Overlay
- NVIDIA GeForce Experience
- Razer Synapse
- Other macro software
Disable overlays temporarily and test again.
2. Check for Duplicate Key Assignments
Hunt does not always prevent duplicate bindings that conflict logically. Review your settings carefully and remove overlapping primary inputs.
3. Update Drivers
Outdated input or chipset drivers can cause inconsistent detection. Update:
- Keyboard firmware
- Mouse drivers
- Controller drivers
- Windows updates
Comparison of Fix Methods
| Method | Difficulty | Time Required | Effectiveness |
|---|---|---|---|
| Reset to Default Controls | Easy | 2 Minutes | High |
| Manual Rebinding | Moderate | 5–10 Minutes | High |
| Disconnect Controllers | Easy | 2 Minutes | Medium to High |
| Delete User Folder | Moderate | 10 Minutes | Very High |
| Verify Game Files | Easy | 10–20 Minutes | High |
In most verified cases, deleting the user configuration folder combined with a control reset fully resolves the issue.
Preventing Future Occurrences
Once resolved, take preventive measures to reduce the chances of seeing the error again.
- Avoid switching input devices frequently.
- Keep backup copies of working config files.
- Recheck bindings after major updates.
- Do not force close the game while saving settings.
Maintaining consistency in your control setup reduces the likelihood of conflicts.
When to Contact Support
If all solutions fail, the issue may be tied to account syncing or a rare bug introduced in a recent patch.
You should contact support if:
- The error persists after full reinstallation.
- Settings reset every time you launch the game.
- The issue appears across multiple input devices.
Provide detailed information, including:
- Your platform (Steam, etc.)
- Input devices used
- Screenshots of control settings
- Steps already attempted
Clear documentation significantly speeds up resolution.
Final Thoughts
The “Please Assign Buttons to Actions” error in Hunt: Showdown is serious enough to block gameplay, but it is rarely permanent. In most cases, it stems from configuration inconsistencies, device conflicts, or minor file corruption.
By methodically resetting controls, ensuring every critical action is assigned, removing input conflicts, and refreshing configuration files, you can resolve the problem quickly and reliably.
Take a systematic approach rather than trying random fixes. Hunt: Showdown is a precision-focused game where proper input configuration is essential—not just for launching the match, but for surviving it. Fix the foundation, and you can return to tracking bounties with confidence.